Jiangsu Nanyuan Hydraulic
Y82 Series Vertical Stainless Steel Baler
Compare the vertical feed opening with the longest stainless offcuts and the bale shape required by the receiving processor.
Product Category
Stainless Steel Balers
Browse the range
Explore Stainless Steel Balers models
HBM-400 Series Stainless Steel Baler
Nanyuan archive — HBM-400: Main cylinder force (ton): 400; Press box (L × W × H) (mm): 4000×1500×800. Confirm the current configuration.
Y82T-200 Vertical Stainless Steel Baler
Nanyuan archive — Y82/T-200: Main cylinder force (ton): 200; Press box (L × W × H) (mm): 1600×1100×1500. Confirm the current configuration.
HBM Series Stainless Steel Baler
The archived HBM family includes several press forces; compare box and feed dimensions before selecting a stainless bale size.
Y82/T-250 Vertical Stainless Steel Baler
Nanyuan archive — Y82/T-250: Main cylinder force (ton): 250; Press box (L × W × H) (mm): 2400×1100×1800. Confirm the current configuration.
HBM-315 Series Stainless Steel Baler
Nanyuan archive — HBM-315: Main cylinder force (ton): 315; Press box (L × W × H) (mm): 4000×1500×800. Confirm the current configuration.
Y82T-315 Vertical Stainless Steel Baler
Nanyuan archive — Y82/T-315: Main cylinder force (ton): 315; Press box (L × W × H) (mm): 2400×1100×1800. Confirm the current configuration.
HBM-250 Series Stainless Steel Baler
Nanyuan archive — HBM-250: Main cylinder force (ton): 250; Press box (L × W × H) (mm): 4000×1500×800. Confirm the current configuration.
Equipment selection
What should buyers know about stainless steel balers?
Stainless steel scrap should be evaluated by grade, form and recovery route before selecting a baler. Sheet offcuts, clippings and mixed fabrication scrap can differ in springback and feed size. The desired bale should also fit the buyer’s handling and downstream requirements.
Selection checklist
- Separate stainless grades and record whether the feed is sheet, profile or mixed offcut.
- Provide maximum dimensions and note attached non-metal parts or contamination.
- Define bale size and handling method before comparing chamber and discharge options.
- Request a material-specific test or documented assumptions for density and throughput.
Buyer questions
Can a general scrap baler handle stainless steel?
Suitability depends on the actual stainless material, feed dimensions and the machine configuration. Confirm this against a model specification and representative material.
Why does material separation matter?
Different grades and contamination levels may affect the value and acceptance of the finished bale. Share the receiving buyer’s requirements when available.
Figures such as force, throughput and output size must be checked against the selected model and representative material.
For a model-specific recommendation, send your material, feed dimensions, target output, destination and power standard.
Discuss a project