Jiangsu Nanyuan Hydraulic
Y81 Series Scrap Metal Baler Y81F-250
Nanyuan archive — Y81/F-250: Main cylinder force (ton): 250; Press box (L × W × H) (mm): 2000 ×1400 ×900. Confirm the current configuration.
Product Category
Scrap Metal Balers
Browse the range
Explore Scrap Metal Balers models
Baler Y81K-1000/Scrap Metal Baler Shear Machine
The K-1000 name and baler-shear wording require a current process drawing before capacity can be stated.
Metal scrap baling machine for Recycling Industry 50Hz
A 50 Hz supply reference should be checked against the destination site's voltage, motor schedule and controls.
Hydraulic Scrap Metal Baler
Start with feed dimensions, target bale, hourly volume and installation space to identify a suitable Y81 configuration.
1000 ton Remote Control Operation Scrap Baler Machine
Confirm which functions are remotely operated and which 1000-ton Y81 chamber option is proposed.
Y81/F-K250 Hydraulic Scrap Metal Baler
The combined F-K250 model code is not in the older Y81 table; request its exact chamber and discharge arrangement.
Y81/T-500 Hydraulic Scrap Metal Baler
Nanyuan archive — Y81/T-500: Main cylinder force (ton): 500; Press box (L × W × H) (mm): 1000×800×900. Confirm the current configuration.
400 tons Scrap Metal Baler Machine
The older Y81 table contains distinct 400-ton configurations; ask which model code and bale cross-section is quoted.
315 tons scrap metal baler
Nanyuan's archive lists both Y81/F-315 and Y81/K-315 options; compare their chambers before choosing a 315-ton design.
Equipment selection
What should buyers know about scrap metal balers?
A scrap metal baler compresses loose metal into bales for handling, storage or downstream processing. The right configuration depends on the feed material, chamber size, required bale, loading method and operating schedule. Press force alone does not establish achievable throughput or bale density.
Selection checklist
- Describe the metal type, loose density, typical piece size and any contamination.
- Set a throughput target with operating hours, loading method and expected interruptions.
- Confirm bale dimensions against transport, handling and the receiving facility.
- Ask for the conditions behind any quoted cycle time, capacity or bale-weight figure.
Buyer questions
How should I compare two balers with the same nominal force?
Compare chamber size, compression sequence, feeding and discharge, electrical configuration and documented test conditions. The same force rating can serve different material flows.
What should I send for a model recommendation?
Send material photos, piece dimensions, required tonnes per shift, target bale, site layout, destination and available power.
Figures such as force, throughput and output size must be checked against the selected model and representative material.
For a model-specific recommendation, send your material, feed dimensions, target output, destination and power standard.
Discuss a project